Product Description

6
NRF52810-Beacon
3.3 Beacon LED and button description
（1）LED will flash 3 times when beacon is powered on.
（2）In power on state,the button is turned on for 3 seconds, the LED light flashes once, and the
beacon is turned off. In power off state, the button is turned on for 3 seconds LED flashes 3 times,
and the beacon is turned on.
4. Beacon data format
4.1 Broadcast data format
Position
0
1
2
3
4
5
6
7
8
9-24
25-26
27-28
29
Data
0x02
0x01
0x06
0x1A
0xFF
0x4C
0x00
0x02
0x15
uuid
major
minor
rssi
at
1m
4.2 Response data format
Position
0
1
2-length
length+1
length+2
length+3
length+4
Data
Name length
0x09
Name
0x13
0x16
0x18
0x03
Position
length+5
-
length+8
length+9
-
length+12
Data
Temperature and
humidity data
Acceleration
data
Position
0
1
2 - length
length+1
length+2
length+3
length+4
length+5
-
length+10
Data
Name length
0x09
Name
0x11
0x16
0x03
0x18
Mac
address
Position
length+11
-
length+12
length+13
-
length+14
Length
+15
length+16
-
length+17
length
+18
Data
major
minor
Transmit
power
Broadcast
interval
Battery
power
Remarks：
1. The scan response packet has two parts: the first part is the name and sensor data; the second
part is the basic information of the beacon, including mac, major, minor and other information.
These two pieces of information are broadcast in turn.
2. If the beacon does not have a sensor, then there is only a portion of the data in the scan
response packet.
3. If the beacon has only one sensor, only the corresponding sensor data is scanned in the