Operating instructions

Default Settings and Technical Specifications A-1
v1.0, March 2010
Appendix A
Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the NETGEAR
Wireless N150 Access Point WN604.
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
• To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
Wireless LED blinks rapidly). Your device will return to the factory configuration settings
shown in Table A-1 below.
• Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Access Point Default Configuration Settings
Feature Description
AP Login
User Login URL 192.168.0.100
User Name (case sensitive) ‘admin’
Login Password (case sensitive) ‘password’
Ethernet Connection
Static IP Address
Ethernet MAC Address See bottom label.
Port Speed 10/100
Local Network (LAN)
Lan IP
Subnet Mask 255.255.255.0
Gateway Address
DHCP Client Disabled