Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
4-6 Management
v1.0, March 2010
4. Release the Reset Button.
The factory default configuration has now been restored and the WN604 is ready for use.
Changing the Administrator Password
The default password is password. You should change this password to a more secure password,
since you cannot change the administrator login name.
To change the Administrator password:
1. Under the Maintenance tab on the main menu, select Password, and then select Change
Password. The Change Password screen displays as shown in Figure 4-5 below.
2. First enter the old password in the Current Password field.
3. Then enter the new password twice—once in the New Password field and again in the Repeat
New Password field.
4. Click Apply to save your change.
Figure 4-5 Change administrator password