Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
4-4 Management
v1.0, March 2010
Restoring Saved Settings
Under the Maintenance tab on the main menu, select Upgrade, then select Restore Settings from
the sidebar to back up your current settings. The following screen displays:
1. Enter the full path to the backup file on your computer (see previous section) or click the
Browse button to locate the file.
2. When you have located the file, click Restore to upload the file. After completing the upload,
the WN604 will reboot automatically.
Restoring the WN604 to the Factory Default Settings
It is sometimes desirable to restore the wireless access point to the factory default settings. This
can be done by using the Restore Defaults option, which restores all factory settings.
To access this function:
1. Under the Maintenance tab on the main menu, select Reset, and then select Restore Defaults
from the sidebar. The Restore Defaults screen displays, as shown in Figure 4-4 below.
Figure 4-3 Restore Configuration settings from file