Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
3-18
v1.0, March 2010
1. Under the Configuration tab, select Security on the main menu, select Advanced from the
left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen
displays.
2. Enter the RADIUS settings as shown in ““Configuring the RADIUS Server Settings” on
page 3-9.
3. Click Apply to save your RADIUS settings
4. Under the Configuration tab, select Security from the main menu. The screen for Edit
Security Profile displays.
5. From the Network Authentication drop-down menu, select WPA & WPA2 with RADIUS
from the list. By default, Data Encryption will be set to TKIP+AES.
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7. Click Apply to save your settings.