Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
3-16
v1.0, March 2010
Configuring WPA2 with RADIUS
Not all wireless adapters support WPA2. Furthermore, client software is required on the client.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
To configure WPA2 with RADIUS:
1. Under the Configuration tab, select Security on the main menu, select Advanced from the
left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen
displays.
2. Enter the RADIUS settings as shown in ““Configuring the RADIUS Server Settings” on
page 3-9.
3. Click Apply to save your RADIUS settings.
4. Under the Configuration tab, select Security from the main menu The screen for Edit
Security Profile displays.
5. From the Network Authentication drop-down menu, select WPA2 with RADIUS from the list.
By default, Data Encryption will be set to AES.
Figure 3-11 Configure WPA2 with RADIUS