Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
3-10
v1.0, March 2010
To set up or modify the RADIUS Server Settings:
1. From your Web browser, log in to the WN604 using the default LAN address of
http://192.168.0.100, user name admin and password password, or use the LAN address and
password that you set up.
2. Under the Configuration tab, select Security on the main menu, select Advanced from the
left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen
displays, as shown in Figure 3-7.
3. Enter the following RADIUS Server settings:
• Authentication Server. This configuration is required for authentication using a RADIUS
Server.The IP Address, Port Number, and Shared Secret are required for communication
with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to
use, if the Primary RADIUS Server fails.
– IP Address. The IP address of the RADIUS Server.
– Port Number. The port number of the RADIUS Server. The default is 1812.
Figure 3-7 RADIUS server settings