Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
3-8
v1.0, March 2010
6. If the wireless client is added successfully and the WN604’s wireless settings have been
changed, a Success dialog appears with a message. The the user can click to view the new
settings.:
7. If the settings have not been changed, the user can click on the Success dialog to return to the
Add WPS Client screen.
8. In case of an error in completing the WPS process, refer to the help provided.
Configuring Security Manually
In case you are configuring security on your WN604 Wireless Access Point manually, the
remaining sections of this chapter will guide you through the process.
SSID and WEP/WPA Settings Setup Form
For a new wireless network, print or copy this form and fill in the configuration parameters. For an
existing wireless network, the person who set up or is responsible for the network will be able to
provide this information. Be sure to set the Regulatory Domain correctly as the first step.
• SSID: The Service Set Identification (SSID) identifies the wireless local area network.
NETGEAR_11ng is the default WN604 SSID. However, you may customize it by using up to
32 alphanumeric characters. Write your customized SSID on the line below.
___________________________________
Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter
card. All wireless nodes in the same network must be configured with the same SSID:
• Authentication:
Figure 3-6 WPS success - settings changed