Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
3-6
v1.0, March 2010
• Disable AP’s PIN. Click in the checkbox if you wish to disable the AP’s PIN. An external
registrar can only configure the router's wireless settings through WPS when the AP's PIN
is enabled. The default is Enable.
• Keep Existing Wireless Settings: Check this option if you wish to keep the current
wireless settings, i.e. the WN604 is in the WPS configured state. This option is unchecked
by default (i.e. the WN604 is unconfigured by default).
2. Click the Add WPS Client option in the left pane. The Add WPS Client information screen
appears, as shown below:
Warning: By using this AP's WPS PIN, an external registrar can set or get the AP's
wireless settings. So a wireless external registrar can get the AP's wireless
settings through WPS with the AP's PIN, and apply the settings to get
itself connected to the router.
Figure 3-3 Add WPS client info