Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
2-14 Basic Installation and Configuration
v1.0, March 2010
1. From main menu under Configuration, select Wireless. The Wireless Settings screen of your
802.11b/bg/ng wireless access point displays, as shown in Figure 2-9 below.
2. Configure the Wireless LAN settings based on the following field descriptions:
• Wireless Mode. Select the desired wireless operating mode. The default is 11ng. The
options are:
– 11b – All 802.11b wireless stations can be used. (The 802.11g wireless stations can
still be used if they can operate in 802.11b mode.)
– 11bg – Both 802.11b and 802.11g wireless stations can be supported.
– 11ng – All 11b, 11g, and 11ng wireless stations can be used. This is the default. If you
select this option, then two additional options, Channel Width and Guard Interval, are
displayed.
Figure 2-9 Configure wireless settings 802.11b/bg/ng
Note: If you select one of these option and if other settings on this screen are
disabled, then you must select the Turn Radio On radio button to
enable available options on this screen.