Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
2-8 Basic Installation and Configuration
v1.0, March 2010
2. Configure the following information:
– Time Zone. From the pull-down menu, select the local time zone for your wireless access
point from a list of all available time zones. The default is USA-Pacific.
– NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP
Server. The Default is Enabled.
– Use Custom NTP Server. Check the option if you have a custom NTP server. The default
is Disabled.
– Hostname / IP Address. Enter the host name or the IP address of the custom NTP server.
The default is time-b.netgear.com.
3. Click Apply.
Figure 2-5 Timezone and system time related settings
Note: You must have an Internet connection to get the current time.