Operating instructions

NETGEAR Wireless N150 Access Point WN604 Reference Manual
1-8 Introduction
v1.0, March 2010
Rear Panel
The WN604 rear panel functions are described below:
1. Power Socket
This socket connects to the WN604 12V 1A power adapter.
2. Power ON/OFF switch.
3. 4 x 10/100 RJ-45 Ethernet Ports
Use the WN604 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as a
hub, switch, router, or PoE switch.
4. Restore to Factory Defaults Button
The restore to default button located between the Ethernet RJ-45 connector and the antenna
restores the WN604 to the factory default settings.
1. Fixed rear Antenna
The WN604 provides a single fixed antenna on the rear panel.
Figure 1-2 WN604 Rear Panel