User's Manual
Manuals
Brands
RadioFrame Networks Manuals
Electronics
S-Series OmniCell@Home
20
21
22
23
24
25
26
27
28
29
Table Of Contents
1 Introduction
1.1 System Definition
1.2 Document Scope
1.3 General Safety Information
1.3.1 Confirmation of Conformance to National Regulation
1.3.2 Static Sensitive Precautions
1.3.3 Safety Warnings
1.3.4 Recommendations
1.4 Repair and Technical Support
1.4.1 Technical Support
1.4.2 Field Replaceable Unit (FRU) Policy
2 System Description
2.1 Three-Domain Architecture
2.1.1 Internet Service Provider (ISP) Customer-Premise Domain
2.1.2 Backhaul Domain
2.1.3 Carrier Infrastructure Domain
2.2 PicoBTS Functional Block Diagram
2.3 System Manager Software
2.4 Network Integration
3 Specifications
3.1 Dimensions
3.2 Weight
3.3 Power Supply
3.4 Output Power
3.5 Power Control
3.6 Typical Coverage Area
3.7 Heat Load
3.8 RF Performance
3.8.1 Spurious RF Emissions
3.8.2 Operating Frequency Bands
3.8.3 Transmitter Performance Summary
3.8.4 Receiver Performance Summary
3.9 Environmental Specifications
3.10 Safety and Compliance Specifications
3.11 Antennas
3.12 Logical Channels
3.13 Services
4 Installation
4.1 Dimensioning Considerations
4.1.1 CPE Scaling
4.1.2 Link Dimensioning
4.2 Preparation for Installation
4.3 Installing CPE Equipment
4.3.1 Mechanical Installation Time
4.3.2 Bringing up the PicoBTS
5 Scheduled and Unscheduled Maintenance
5.1 Maintenance
5.1.1 Customer Domain Component (PicoBTS)
5.2 Troubleshooting Guidelines
5.2.1 Fault Indications
5.2.2 System Manager Alarms
5.2.3 Serial Log Upload Procedure
5.2.4 Power Down Procedure
5.2.5 Field Replaceable Unit (FRU) Procedures
6 System Configuration Changes
6.1 Adding S-Series Components
6.2 Spares, Parts and Suppliers
S-Series OmniCell@Home Picocell GSM Implem
ent
ation Guide
System Configuration Changes
998-1027-01 Rev X2
RadioFrame Networks, Inc.
SUPPLIER AND CUSTOMER INFORMATION
29
Appendix D.
Communication Interconnects
<<<TO BE SUPPLIED>>>
1
...
...
27
28
29
