User's Manual

Table Of Contents
System Configuration ChangesS-Series OmniCell@Home Picocell GSM Implementation Guide998-1027-01 Rev X2
Appendix C. RF Emissions Precautions
C.1 Exposure vs. Frequency
Overall exposure may be affected by radio frequency generating facilities that exist at the
time the equipment is being installed or even by equipment installed later. Therefore, the
effects of any such facilities must be considered in site selection and in determining
whether a particular installation meets the requirements of safe operation. Determining
the compliance of transmitter sites of various complexities may be accomplished by
means of computational methods. For more complex sites, direct measurement of power
density may be more expedient. Persons responsible for installation of this equipment are
urged to consult the listed reference material to assist in determining whether a given
installation complies with the applicable limits. In general the following guidelines should
be observed when working in or around radio transmitter sites:
Warning!
All personnel should have electromagnetic energy awareness training.
Warning!
Obey all posted signs.
Warning!
Assume all antennas are active.
Warning!
Never operate transmitters without shields during normal operation.
Warning!
Do not operate base station antennas in equipment rooms.
28 CONFIDENTIAL AND PROPRIETARY RadioFrame Networks, Inc.