User's Manual

Table Of Contents
S-Series OmniCell@Home Picocell GSM Implementation Guide Scheduled and Unscheduled Maintenance
998-1027-01 Rev X2
5 Scheduled and Unscheduled Maintenance
5.1 Maintenance
5.1.1 Customer Domain Component (PicoBTS)
There are no maintenance procedures required for the PicoBTS.
5.2 Troubleshooting Guidelines
Technicians should conduct the following troubleshooting steps in order:
1 Visually inspect for fault indication (LEDs).
2 Inspect the Alarm Manager, and follow alarm resolution procedures.
3 Refer to section1.4, “Repair and Technical Support” on page 8.
4 Complete and save the serial log upload of <<<TBS>>>.
5 Refer to sections <<<power down procedure TBS>>> and <<<FRU procedures:
TBS>>>.
5.2.1 Fault Indications
<<<TO BE SUPPLIED>>>
5.2.2 System Manager Alarms
<<<TO BE SUPPLIED>>>
5.2.3 Serial Log Upload Procedure
<<<TO BE SUPPLIED>>>
5.2.4 Power Down Procedure
<<<TO BE SUPPLIED>>>
5.2.5 Field Replaceable Unit (FRU) Procedures
<<<TO BE SUPPLIED>>>
6 System Configuration Changes
The S-Series system is shipped with the latest software installed. With each new software
release, RadioFrame Networks provides its customers with the new software and
accompanying information in the RadioFrame Networks Customer Release Notes.
Software Download to the PicoBTSs is accomplished remotely from the Software
Download Server.
System Manager contains two separate partitions in which to install software: active and
inactive. This provides the means to revert back to a previous version of system software
if required.
RadioFrame Networks, Inc. SUPPLIER AND CUSTOMER INFORMATION 23