User's Manual

S-Series OmniCell@Home Picocell GSM Implementation Guide Specifications
998-1027-01 Rev X2
3.10 Safety and Compliance Specifications
The S-Series system will meet the following safety and compliance specifications.
Table 15 Safety and Compliance Specifications <<<PENDING>>>
Parameter Applicable Standard
CE / R&TTE
TS 101 087 V8.5.0
ETSI EN 301 502 V8.1.2 (2001-07) (Requested parts only) – Radio
ETSI EN 301 489-1 V1.5.1 (2004-11) – EMC
ETSI EN 301 489-8 V1.2.1 (2002-08) – EMC
for GSM 900/1800 and 850.1900 Pico Class BTS
ETS 300 019 – Parts met by test or design (TBD)
EN 60950 and IEC 60950
FCC
Parts 22 & 24
UL
UL60950
IP Rating
IP 10 (Intended for indoor use)
RoHS
The PicoBTS is designed to meet the RoHS directive
WEEE
The PicoBTS is designed to meet the WEEE directive
3.11 Antennas
Table 16 Antennas
Connector Interface
A
ntenna
SMA-type Um
Note: With the housing in place, the antennas are not visible.
3.12 Logical Channels
Each PicoBTS supports up to 7 traffic channels (1 GSM/GPRS TRX).
Logical channel configurations:
• BCCH (FCCH + SCH + BCCH + PCH + AGCH)
• Extended BCCH
• Combined BCCH and SDCCH
• SDCCH (SDCCH4 and SDCCH8 configurations)
• TCH (TCH + FACCH + SACCH)
• PDCH
• RACH
RadioFrame Networks, Inc. SUPPLIER AND CUSTOMER INFORMATION 19