User's Manual

Table Of Contents
S-Series OmniCell@Home Picocell GSM Implementation Guide Specifications
998-1027-01 Rev X2
The existing BSC and BTS MIBs can be managed by the existing BSS OMC, and the
additional PicoBTS MIBs can be managed by the new S-EMS (a separate NE) or these
MIBs can be integrated into the OMC. One common scenario is to initially deploy a single
S-EMS and then remove it once the integration of the S-Series with standard MNO
element and network management resources is completed.
3 Specifications
3.1 Dimensions
Table 2 Dimensions
Metric (w x h x d cm) Imperial (w x h x d in.)
PicoBTS Volume
(approximate form factor)
26.7 x 18.9 x 4.4 10.6 x 7.5 x 1.8
3.2 Weight
Table 3 Weight
Unit
Estimated Weight
PicoBTS
Inclusive of power supply: 1 kg
3.3 Power Supply
The PicoBTS operates on a single nominal 12 VDC, 1.25 A supply. The electrical
characteristics of the power supply and the input power requirements of the PicoBTS are
listed in Table 4.
Table 4 Power Supply Electrical Requirements
Spec Value
Input Voltage
90-264 VAC
Input Current
< 0.6 A RMS Max
Input Frequency
47 - 63 Hz
Output Voltage / Current
12 VDC @1.25 A
Output Current
No Load to Full Load, No Minimum Load Required
Output Power (Rated)
18 Watts Max
Output Ripple (Peak to Peak)
<150 mV
Output Regulation (Line/Load)
+ 5% for Main Output, Measured at O/P Connector
Line Regulation
+ 1% Max at Full Load
RadioFrame Networks, Inc. SUPPLIER AND CUSTOMER INFORMATION 13