User's Manual

RadioFrame Networks, Inc. S-Series GSM/GPRS Radio Base Station 9
4 Configuring the S1 Router
For the majority of situations, the router configuration does not need your attention.
The S1 uses Dynamic Host Configuration Protocol (DHCP) to find the information it
needs from your Internet Service Provider (ISP) over the Wide Area Network (WAN)
connection.
If you do wish to make router configuration changes, you can use this chapter of the
manual to see what the settings mean. (To secure the router, you will need to change
the default password.)
Logging Into the S1 Router
The router has its own web client for your use. For access, launch Internet Explorer or
Mozilla Firefox browser and enter the router’s IP address—192.168.1.1—in the
browser’s Address Field. Press Enter. The Login screen (Figure 5) appears. Type
admin in the User Name field and admin123 in the Password field. Click Login.
Figure 5 S1 Router Login
In Figure 6 you can see that DHCP is selected, and example settings, such as your
ISP provides, are shown in the “Internet Setup” section of the Setup screen. These
settings will be different in your case, but you don’t need to change anything because
DHCP takes care of the settings automatically.