User's Manual
RadioFrame Networks, Inc. S-Series GSM/GPRS Radio Base Station 7
3 Connecting the S1
Your S1 connects to your broadband modem (cable or DSL). Then you can connect
networked devices, for example a computer and a printer server, to the network ports
on the S1. See Figure 3.
Note: The Internet packets for your cellular service are time-critical for smooth conversation.
Therefore the S1 gives priority to voice packets. It is important to connect the S1
directly to your broadband modem and connect other devices to the network ports on
the S1.
Figure 3 Typical Setup
Placement Tips
The S1 provides a "coverage area" within which you will be able to use your cellular
devices. Typical indoor operating range for cellular devices is between xx and yy
meters away from the S1 base station. Signal strength degrades somewhat as the
distance between your S1 and cellular devices increases. This may or may not be
noticeable to you. Some obstructions can weaken signals simply by getting in the way
of your cellular radio waves, for example, metal appliances, large mirrors, and thick
walls.
If you have concerns about your cellular coverage that might be related to range or
obstruction factors, place your S1 as close as possible to the centre of the area where
you want coverage. In a multi-storey setting, place the S1 on a floor that is as close to
the centre of the building as possible. This may mean placing the S1 in an upper
storey.
Making the Connections
Here are the steps to connecting the S1:
• Connect the S1 WAN port to the Ethernet port on the DSL or cable modem
• Connect any network devices to the LAN ports on the S1
•
Connect the AC power cable to the S1