User's Manual

14 S-Series GSM/GPRS Radio Base Station RadioFrame Networks, Inc.
The Security Tab—Port Forwarding
Figure 10 Port Range Forwarding
Port Range Forward
Use this table to allow for public services or for specialized
applications to work on your network.
Application Enter the name of the application.
Start Enter the port the server or Internet application uses.
End Enter the same port number or the upper end of the range.
Protocol
Select TCP, UDP, or Both.
IP Address Enter the IP address of the server that you want the Internet users to
be able to access.
Enable checkbox Check the Enabled checkboxes to enable the services you
have defined.
When you are done setting up port forwarding, click the Submit Changes button.
The Security Tab—HTTPS Enable/Disable
This page allows you to turn on or off management of HTTPS.
The Status Tab
The Status Tab shows the current router settings in a read-only display. Figure 11
gives an example. These settings are a combination of factory defaults and changes
that have been applied. Table 1 lists the default setting for each parameter.