User's Manual

RadioFrame Networks, Inc. S-Series GSM/GPRS Radio Base Station 13
The Security Tab—Firewall
Figure 9 Firewall: Add Rule
Add Rule
Use this screen to set up rules to filter Internet packets to enhance your
network’s security.
Source IP Enter the IP Address where the filtered packets originate.
Destination IP Enter the IP Address where the filtered packets are destined.
Protocol Optionally, choose a protocol for the packets you wish to filter.
Application
Choose the application for the packets you wish to filter.
Source Port No This field is read-only.
Destination Port No This field is read-only.
Action Choose to block packets or not.
When you are done setting up filtering rules, click the Submit Changes button.
View/Delete Firewall Rules
View/Delete Rules link pops up a window that shows a
table of the firewall rules that are set up.