User's Manual

Installing the RadioFrame System
19
Figure 10 A wall mount requires two screws to anchor the RFU.
Ceiling Mount
1 Place the 8.5” x 11” drawing template (P/N 981-1010-00) on the ceiling where the
RFU is to be mounted.
2 Mark the four locations indicated on the template.
3 Drill four holes with the appropriately sized bit: 3/16” for the provided wood
screws, or 9/32” for 1/4” bolts (bolts not provided).
If using the provided wood screws, ensure that all four screws penetrate wood.
Otherwise, use alternative mounting screws or bolts to secure the ceiling bracket.
4 Using four screws or bolts, attach the ceiling bracket to the ceiling as shown.
5 Attach the RFU to the ceiling mount bracket and fully tighten the thumbscrew.