Manualshelf

User's Manual

ManualsBrandsRadioFrame Networks ManualsElectronicsMC Series Standard Capacity Base Station
81828384858687888990
MC-Series ©2008 RadioFrame Networks, Inc. 5-23
Proprietary and Confidential Information
MC-Series Standard Capacity system998-1019-01 Rev X1
• SW Selected—currently selected software version, A or B
• SW Loaded—currently loaded software version, A or B
• SW Versions A—Software version loaded in partition A
• SW Versions B—Software version loaded in partition B
Figure 5.14 Software Version Information Page
F. Changing the iDEN Configuration
The MCSC system operates as a series of base radios. Each RadioBlade
transceiver in the MC-Series is assigned a BR ID and sector (1, 2 or 3). And,
each BR in the MCSC system is assigned a default cabinet position in the site
datafill.
To change the default cabinet position:
1 Select the
iDEN Configuration link at the bottom of the System Configuration tab.
2 Enter the
Cabinet and Position for the specified BR(s).
3 Select any
Quad BRs (only one per group), according to site datafill parameters.