User's Manual

Proprietary and Confidential Information

MC-Series Standard Capacity system998-1019-01 Rev X1

Overview

This chapter describes the initial power up of the system after the

components have been installed and connected to all cabling.

Contents

5.1 Initial Powering Procedure....................................................................... 5-2

5.2 System Setup .......................................................................................... 5-3

5.3 Management—Datafill, Configuration and Optimization.......................... 5-8

5.3.1 Datafill.................................................................................................. 5-8

5.3.2 Parameters that Do Not Apply............................................................. 5-9

5.3.3 Recommended Datafill Parameters..................................................... 5-9

5.3.4 rxTxGain = 0 ........................................................................................ 5-9

5.3.5 defaultTxPower.................................................................................. 5-10

5.4 System Manager, Configuration, and Optimization ............................... 5-10

5.4.1 Navigating System Manager.............................................................. 5-10

5.5 Functionality Test................................................................................... 5-13

5.6 Configuring the MC-Series Standard Capacity system.......................... 5-14

5.6.1 Navigating the System Configuration ................................................ 5-14

5.7 Optimization Procedures ....................................................................... 5-24

5.7.1 Local Performance Monitoring........................................................... 5-24

5.7.2 iDEN Uplink Analysis......................................................................... 5-26

Chapter 5 Initial Power-up