User's Manual

MC-Series Standard Capacity system
998-1019-01 Rev X1
4-2 ©2008 RadioFrame Networks, Inc. MC-Series
Proprietary and Confidential Information
4.1 Mounting the MC-Series Standard Capacity system cabinet
Refer to the manufacturer’s documentation (included with the MCSC system
Installation Kit) for installation procedures for mounting and securing the MCSC
system cabinet.
This section describes procedures for mounting the following non-RadioFrame
Networks equipment in the MCSC system cabinet:
• iSCIII
• EAS
•CSU
Warning!
Always use two or more persons whenever moving a cabinet. A fully configured
equipment cabinet weighs approximately 350 lbs (159 kg).
Warning!
Any equipment installed in the MCSC system cabinet shall be UL listed.
Warning!
User equipment that is installed shall not draw a combined current of more than 5
Amps. This combined total shall be determined from the marked current rating
label of the equipment to be installed.
Warning!
Verify all power has been disconnected before servicing components that are not
“hot swappable”. This includes disconnecting power cords as needed.