Manualshelf

User's Manual

ManualsBrandsRadioFrame Networks ManualsElectronicsMC Series Standard Capacity Base Station
151152153154155156157158159160
MC-Series ©2008 RadioFrame Networks, Inc. 9-23
Proprietary and Confidential Information
MC-Series Standard Capacity system998-1019-01 Rev X1
Figure 9.12 Seating the RadioBlade Transceiver
5. Connect the Rx and Tx cables to the correct ports on the RadioBlade
transceiver, and use the SMA torque wrench to tighten.
6. Re-insert the DRBS into its chassis. To do this, press up on one side rail locking
arm and press down on the other side-rail locking arm, and then push the unit
into the cabinet (see Figure 9.13).