User's Manual

Proprietary and Confidential Information

MC-Series Standard Capacity system998-1019-01 Rev X1

1.1 Introduction

All specifications and requirements in this document pertain to MC-Series Standard

Capacity system equipment operating in 800E band with medium power

amplification. RadioFrame Networks recommends reading the entire manual before

attempting to install or operate RadioFrame Networks equipment.

1.2 References

In addition to this manual, the following technical manuals are related to the MC-

Series Standard Capacity system and may be needed for installation or

maintenance.

• Generation 3 Site Controller System Manual, Motorola, 68P80801E30-O

• iDEN OMC-R Configuration Management Parameters Technical Manual,

Motorola, 68P80802E10

• Channel Service Unit (CSU) manufacturer’s documentation

• Cabinet manufacturer’s documentation (shipped with MCSC system)

• Power supply and battery manufacturer's installation and maintenance

documentation

• Distributed Antenna System (DAS) manufacturer's documentation

• General Dynamics R2660 Series Communications System Analyzer Operators

Manual, 68-P35270C001 Rev F

• Quality Standards—Fixed Network Equipment (FNE) Installation Manual

(R56), Motorola, R56 current edition

• National Electrical Code (NEC), current edition

• National Fire Protection Associations (NFPA) Code 70

• ASTM (American Society For Testing and Materials) 488-90

• Bellcore Technical Specifications 1089, GR-63-CORE

1.3 Safety Precautions

Electrostatic discharge (ESD)

Electrostatic discharge (ESD) can damage equipment and impair electrical

circuitry. It occurs when electronic printed circuit cards are improperly handled and

can result in complete or intermittent failures.

• Prior to handling, shipping, and servicing equipment, always put on the

RadioFrame Networks-supplied conductive wrist strap and connect it to a

grounding device to discharge any accumulated static charges.