Manualshelf

User's Manual

ManualsBrandsRadioFrame Networks ManualsElectronicsMC Series Standard Capacity Base Station
141142143144145146147148149150
MC-Series ©2008 RadioFrame Networks, Inc. 9-21
Proprietary and Confidential Information
MC-Series Standard Capacity system998-1019-01 Rev X1
• Group B: slots 9 through 16
• Group C: slots 17 through 24
Figure 9.10 DRBS Slot Group Arrangement
2. Pull out the DRBS using the handle on the front of the unit.
3. Remove the RadioBlade transceiver that is to be replaced.
a. Using the SMA torque wrench, disconnect the Rx and Tx cables from
the RadioBlade transceiver.
b. Loosen the screw of the lock-down strap covering the RadioBlade
transceiver, and remove the strap and screw and place them aside.