User's Manual

MC-Series Standard Capacity system
998-1019-01 Rev X1
8-14 ©2008 RadioFrame Networks, Inc. MC-Series
Proprietary and Confidential Information
• Upon unlocking an administratively locked RadioBlade transceiver, the
BR that was previously disabled due to the locked state will go into the
enabled state.
The lock policy will be preserved through a system reset. Locking of the
RadioBlade transceiver will also be preserved through a system reset. Locking
of RadioBlade transceivers in the disabled state will not be preserved through a
system reset. However, after a system reset, those blades that were originally
in the disabled state due to the effects of a) the locked RadioBlade transceiver
and b) the locking policy will likely return to the disabled state.
The RadioBlade Control page of System Manager has a “Lock All / Unlock All”
feature. Refer to Figure 8.2. With an MCRB, locking the top padlock as shown
on the RadioBlade Control page will lock all carriers for that MCRB while
selecting the padlock on the individual carrier will lock only that carrier.