User's Manual

MC-Series Standard Capacity system
998-1019-01 Rev X1
MC-Series ©2008 RadioFrame Networks, Inc. 1
For Customer and End User Use Only
Preface
Audience
This document is written for the technical staff who are standards for
installing, modifying and maintaining RadioFrame Networks equipment
at the customer sites. All specifications and requirements pertain to
MC-Series Standard Capacity (MCSC) system equipment operating in
800E band with medium power amplification, as required in some
integrated Digital Enhanced Network (iDEN) installations.
The user of this document should be proficient with the following:
• Motorola Generation 3 Site Controller System
• iDEN OMC-R Configuration Management procedures
• Channel Service Unit (CSU) manufacturer’s specifications
• Power supply and battery manufacturer's specifications
• General Dynamics R2660 Series Communications System
Analyzer
• Fixed Network Equipment (FNE) Quality Standards
• National Electrical Code (NEC) standards
• National Fire Protection Associations (NFPA) Code 70
• ASTM (American Society For Testing and Materials)
• Bellcore Technical Specifications
• Electrostatic discharge (ESD) standards and procedures
Purpose
The purpose of this document is to provide an overview of the
RadioFrame Networks equipment and describes standards for
installing, modifying and maintaining RadioFrame Networks equipment
at the i customer sites.
Scope
This document provides instructions fro installing and operating
RadioFrame equipment.
Conventions
The following font and style conventions are used throughout this