User's Manual

MC-Series Outdoor Pole Mount Users Guide998-5005-01 Rev X1

CONFIDENTIAL AND PROPRIETARY

Table 6.1 FRU Table

6.1.2 Field Replaceable Units (FRUs), Parts and Extra Supplies

It is recommended that the IIOF purchase spares for the MC-Series OPM System

and maintain inventories in Logistics Centers for ordering on an as-needed basis.

The MC-Series OPM system has been designed so that Field Replaceable Units

(FRUs) can be replaced to restore normal system operation as quickly as

possible. Refer to the previous section 6.1.1 and the FRU table, Table 6.1.

For equipment not supplied by RadioFrame Networks, such as the EAS, iSCIII, or

CSU, follow standard IIOF policies and procedures for FRU replacement.

Note: The previous section contains recommended part

numbers (P/N) and manufacturers of various

hardware, tools and equipment used during the

installation, operations and maintenance of the

MC-Series OPM System.

6.2 Power Down Procedure

When powering down the entire MC-Series OPM System, follow these instructions.

RadioFrame

Networks PM

Description

176-0610-XX Power Distribution Unit (PDU)

176-1040-XX Airlink/BTS Interface Chassis (ABIC)

176-7090-XX OPM Rx Filter

176-1076-XX OPM RF Shelf

176-1030-XX Diversity RadioBlade Transceiver Shelf (DRBS)

176-0180-XX Fan DRBS

176-1090-XX 800E Tx Filter

176-1223-01 Outdoor Pole Mount Cabinet

176-1219-XX Fan Tray (w/fans) for an ABIC Chassis

176-0011-XX Fan for DRBS and RF Shelf

176-7555-XX Base Processing Card (BPC) w/(2) SPAM-HC

176-7540-XX MC Common RadioFrame Interface Card (CRIC)

176-7562-XX Ethernet Rear Transition Module (ERTM)

176-0820-CC Coaxial RMII Transceiver Card (CRTC)

176-7502-XX 4U Chassis

176-0860-XX MCRB iDEN FRU