User's Manual

MC-Series Outdoor Pole Mount

998-5005-01 Rev X1

CONFIDENTIAL AND PROPRIETARY

Preface

Audience

This document is written for the technical staff who are standards for

installing, modifying and maintaining RadioFrame Networks equipment

at International iDEN Operators Forum (IIOF) customer sites. All

specifications and requirements pertain to OPM Series System

equipment operating in 800E band with medium power amplification,

as required in some International iDEN Operators Forum (IIOF)

integrated Digital Enhanced Network (iDEN) installations.

The user of this document should be proficient with the following:

• Motorola Generation 3 Site Controller System

• iDEN OMC-R Configuration Management procedures

• Channel Service Unit (CSU) manufacturer’s specifications

• Power supply and battery manufacturer's specifications

• General Dynamics R2660 Series Communications System

Analyzer

• Fixed Network Equipment (FNE) Quality Standards

• National Electrical Code (NEC) standards

• National Fire Protection Associations (NFPA) Code 70

• ASTM (American Society For Testing and Materials)

• Bellcore Technical Specifications

• Electrostatic discharge (ESD) standards and procedures

Purpose

The purpose of this document is to provide an overview of the

RadioFrame Networks equipment and describes standards for

installing, modifying and maintaining RadioFrame Networks equipment

IIOF’s customer sites.

Scope

This document provides instructions fro installing and operating

RadioFrame equipment.