User's Manual

MC-Series Outdoor Pole Mount Users Guide

998-5005-01 Rev X1

CONFIDENTIAL AND PROPRIETARY

4.1 Final Checkout procedures

This chapter describes procedures for:

• Prerequisites

• Checkout procedures

• Final checkout setup

• Initial power

• System setup

• System verification

• Functionality test

4.1.1 Prerequisites

Ensure that the following has taken place:

• The T1 is live and has been tested

• The datafill has been completed, including BR Cabinet and position

assignments, and conforms to the recommended datafill shown in section

2.3.3 (Recommended Datafill Parameters).

• Site configuration is available

• All cabling and installation work has been completed and all punchlist items

corrected

Required Tools:

• R2660 Series Communication System Analyzer

• Digital RF meter

• Laptop computer to bring up the MC-Series OPM System. At a minimum,

the laptop must be loaded with the following fully functional equipment (or

equivalent):

• Pentium II / 233 MHz (Pentium III / 500 MHz recommended, or better)

• 128 MB of memory (256 MB recommended)

• 10 GB hard drive (64 MB disk drive space minimum available for

software)

• 12x (or faster) CD-ROM (USB memory stick with 64 MB recommended)

• Windows 2000 Professional or better recommended

• Internet Explorer 6.0 or later (not Mozilla Firefox)