User's Manual

MC-Series Outdoor Pole Mount Users Guide

998-5005-01 Rev X1

CONFIDENTIAL AND PROPRIETARY

Figure 3.8 User Name Set in User/Rights Security Dialog Box

12. Now proceed to the next section to upgrade the system software.

3.2 Update the MC-Series OPM System Software

The following procedure assumes that the MC-Series OPM System is currently

running at least the RadioFrame Networks 15.0 release, and that the system is to be

upgraded to the RadioFrame Networks MC 15.0 OPM load. If this is not the case, the

system must first be upgraded to a version of RadioFrame Networks software that

supports software baselining. For SW download scenarios involving other software

upgrades or downgrades, please contact RadioFrame Networks Technical Support

for specific instructions (1-800-328-0847).

The procedure also assumes that the service laptop to be used for upgrading the

system software contains the system software load extracted to the root directory

and that the correctly configured FTP server is running on the laptop. If this software

is not yet in place, please start at section 3.1.2 (Download FTP Server Software to

the Laptop Computer).

1. Connect the laptop to the MC-Series OPM System, start System Manager, and

2. Navigate to the Software Download & System Reset page (Figure 3.9) by

selecting the System Configuration tab and clicking on the Software

Download & System Reset link.