User's Manual

MC-Series Outdoor Pole Mount Users Guide
998-5005-01 Rev X1
2-24 ©2007 RadioFrame Networks, Inc. MC-Series
CONFIDENTIAL AND PROPRIETARY
F. Changing the iDEN Configuration
The MC-Series OPM System operates as a series of base radios. Each
RadioBlade transceiver in the MC-Series is assigned a BR ID and sector (1, 2
or 3). And, each BR in the MC-Series OPM System is assigned a default
Cabinet position in the site datafill.
To change the default Cabinet position:
1 Select the iDEN Configuration link at the bottom of the System Configuration tab.
2 Enter the Cabinet and Position for the specified BR(s).
3 Select any Quad BRs (only one per group), according to site datafill parameters.
4 In Figure 2.15, one Quad BR has been selected: BR Instance 5 Cabinet 3
Position 5, in the first group. In this example, BRs 5 through 8 make up the Quad
BR.
5 Select the Save Changes button to save the changes.