User's Manual

MC-Series Outdoor Pole Mount Users Guide998-5005-01 Rev X1
MC-Series ©2007 RadioFrame Networks, Inc. 2-21
CONFIDENTIAL AND PROPRIETARY
D. Changing the Device Name, IP Address or Building Location
The System Configuration page displays the configuration for the selected
component (ABIC and DRBS) including the Device Name, IP Address, and
Building Address—this information can be changed at any time. For the ABIC,
this page also displays External IP Configuration, the information that systems
outside the MC-Series OPM System use to recognize it, including the Default
Gateway (the IP address of the CSU).
1. Select the icon of the component to be changed.
2. For Device Name, enter up to 31 alphanumeric characters to uniquely
identify the component.
3. The IP Address is assigned during the installation of the MC-Series OPM
System, and doesn’t need to be changed.
4. For Building Address, enter up to 3,000 alphanumeric characters specifying
the location of the component. Enter information such as the street address,
mailing address, building and other site information, as well as the building
floor, Telco closet and Cabinet location.
5. Select Save Changes.