User's Manual

MC-Series Outdoor Pole Mount Users Guide
998-5005-01 Rev X1
2-6 ©2007 RadioFrame Networks, Inc. MC-Series
CONFIDENTIAL AND PROPRIETARY
Figure 2.4 System Manager Log-in Window
Note: Before proceeding to iDEN Configuration, it is a
good idea to ensure that the MC-Series OPM
software is the latest released version. Refer to
section 2.6.1 .E. (Viewing Hardware and Software
Versions).
7. Select the iDEN Configuration link at the bottom of the System Configuration
page.
a. On the iDEN Configuration page, make sure the configuration agrees
with the site datafill and also the RF cabling. The sector assignments
must match the cabling inn the rear of the enclosure. All cab/pos values
must be associated with the appropriate sector. The MC-Series OPM
System will attempt to register all BRs with the cab/pos values selected
in this menu. An example configuration is shown in Figure 2.5. For more
information.