User's Manual

MC-Series Outdoor Pole Mount Users Guide998-5005-01 Rev X1

CONFIDENTIAL AND PROPRIETARY

Figure 1.7 Top of Rack (TOR) Rear of the Cabinet, Bulkhead, Cabling and Equipment

1.3.4 Grounding

1 Ground the Cabinet ground bar to the site according to IIOF’s installation

instructions using 2-hole terminal lug. Type is Panduit 2-hole, P/N LCD6-14A, or

equivalent. Required crimp tool is CT-1700.

2 Connect the site ground to the ground at the rear of the enclosure according to

IIOF’s installation procedures (see Figure 1.7 for ground location at the rear of the

enclosure).

1.3.5 T1

1. Follow IIOF procedure for routing the site T1 cable through the rear of the

enclosure as shown in Figure 1.7.

2. Connect the T1 cable to the CSU according to IIOF’s installation instructions.

1.3.6 GPS Surge Arrestor

Note: The Surge Arrestor comes installed in the

enclosure.

1. Connect each GPS surge arrestor to the GPS antenna coax according to IIOF’s

installation procedures.