User's Manual

MC-Series ©2007 RadioFrame Networks, Inc. F-3
CONFIDENTIAL AND PROPRIETARY
MC-Series Outdoor Pole Mount Users Guide
998-5005-01 Rev X1
Figure F-1 BER Test Flow
F.5 Equipment Connection/Setup
Set up the equipment to measure Rx BER as follows:
1. Connect a laptop to port 8 of the ABIC CRIC using an Ethernet (CAT-5) cable.
2. Boot the laptop, start System Manager and log in.
3. Launch a browser session and then enter the MC-Series OPM System IP
address (http://192.168.200.5). Select the Performance Monitoring tab to
display the login window. Type the User Name, (Sysadmin, case sensitive),
and Password (Radioframe, case sensitive), and then select OK.
4. Connect Signal Generator to MC-Series OPM System