User's Manual

MC-Series Outdoor Pole Mount Users Guide

998-5005-01 Rev X1

CONFIDENTIAL AND PROPRIETARY

Table D.8 Dispatch Connection Stability Worksheet

D.7 Idle SQE Testing and Validation

Using the iFTA tool in “Single Cell” mode, record the idle RSSI and SQE values for

the control channel for at least one hour per sector, while the mobile remains fixed.

D.8 System Self-Recovery Test

The following test is to determine the ability of the MC-Series OPM System to

recover from various iSC-3 conditions.

Loss of T1

While the MC-Series OPM System is operating, disconnect the T1 connection

to the iSCIII for one minute, and then reconnect it. Monitor the system

recovery, and then validate the system by placing a successful call on each

sector.

iSCIII Power Loss

While the MC-Series OPM System is operating, the iSCIII shall be power

cycled and system recovery will be monitored and validated by placing a

successful call on each sector.

Loss of GPS

While the MC-Series OPM System is operating, the GPS connection to the

iSCIII will be disconnected until all Satellites are lost and then reconnected.

System recovery will be monitored and validated by placing a successful call

on each sector.

New datafill download

System recovery will be verified by pushing a new datafill download to the

iSCIII.

Dispatch #1 Carrier # RSSI (dB) SQE (dB) Sector Quality (1-5) Duration (min)

Dispatch #2

Dispatch #3