User's Manual

MC-Series Outdoor Pole Mount Users Guide998-5005-01 Rev X1
MC-Series ©2007 RadioFrame Networks, Inc. 6-21
CONFIDENTIAL AND PROPRIETARY
Figure 6.10 DRBS Slot Group Arrangement
2. Pull out the DRBS using the handle on the front of the unit.
3. Remove the RadioBlade transceiver that is to be replaced.
a. Using the SMA torque wrench, disconnect the Rx and Tx cables from
the RadioBlade transceiver.
b. Loosen the screw of the lock-down strap covering the RadioBlade
transceiver, and remove the strap and screw and place them aside.
c. Gently lift and remove the RadioBlade transceiver from the slot in the
DRBS backplane.
d. Place the RadioBlade transceiver in anti-static packaging for shipment.