User's Manual

Management—Datafill, Configuration and Optimization MC-Series High-Power System
998--01 Rev X1
68 CONFIDENTIAL AND PROPRIETARY RadioFrame Networks, Inc.
TRADE SECRET INFORMATION
Figure 43 Software Version Information Page
6.2.2.7 Changing the iDEN Configuration
The MC-Series system operates as a series of base radios. Each RadioBlade transceiver
in the MC-Series is assigned a BR ID and sector (1, 2 or 3). And, each BR in the MC-
Series system is assigned a default cabinet position in the site datafill.
To change the default cabinet position:
1 Select the iDEN Configuration link at the bottom of the System Configuration tab.
2 Enter the Cabinet and Position for the specified BR(s).
3 Select any Quad BRs (only one per group), according to site datafill parameters.
4 In Figure 44, one Quad BR has been selected: BR Instance 5 Cabinet 3 Position
5
, in the first group. In this example, BRs 5 through 8 make up the Quad BR.
5 Select the Save Changes button to save the changes.