Installation Guide

RadioFrame System
Pre-Installation
RFN_3.1 Beta 35
System Unit Weight
iSC-3 (2)
EAS
CSU
Power Plant Rectifier 72 lbs
(Power Plant 58 lbs) + (two Rectifiers at 7 lbs ea.)
Battery 600 lbs
(eight batteries at 75 lbs each)
3.3.4 Power
System Unit Power
RadioFrame System NCU
 100-240 Volts AC, 47-63 Hz, 8-3.5A, or
 Negative 52.5 ±.5 Volts DC, 11A
ACU
 100-240 Volts AC, 47-63 Hz, 8-3.5A, or
 Negative 52.5 ±.5 Volts DC, 11A
iDEN Interface iSC-3 (1)
 Negative 40-60 Volts DC; 1.5 A
iSC-3 (2)
 Negative 40-60 Volts DC; 1.5 A
EAS
 Negative 40-60 Volts DC
CSU
 Negative 40 Volts DC
Power Plant Rectifier
Input
Voltage
 85 to 265 VAC (continuous)
 45 to 70 Hz
Current
 12 Amp maximum
The rectifier’s micro-controller adjusts
the output current to limit the input
current to allow each rectifier to be
plugged into a standard 115/230 VAC @
15 Amp IEC outlet.
Power Factor >90% for 20% to 100% loads
Output
Voltage
 50.00 to 60.00 VDC
 52.5 VDC Factory Set (default)
Regulation
 ± 1.0% (includes output o-ring diode)
Overvoltage
 50.00 to 60.00 VDC
 57.00 VDC Factory Set (default)
 RED [FAIL] LED indication and shuts
down rectifier providing output
current.
Noise
 <32 dBmC (voice frequency)
 <100 millivolts-RMS (wide band)
 <250 millivolts peak-to-peak