Installation Guide
Table Of Contents
- Title
- Contents
- Introduction
- System Description
- Pre-Installation
- Receipt of Equipment
- Site Planning
- Main Rack and Supporting Hardware
- Remote ACUs
- RFUs
- RadioBlades
- RAPs
- URU
- Interconnecting Cabling
- Main Rack Configuration
- RF Planning
- Site Survey
- Alarm Configuration
- Tools Required
- Installation
- Equipment Commissioning
- iDEN Interface
- Power Plant
- RadioFrame System
- Coverage Validation
- Site Acceptance Guidelines
- RadioFrame System Functionality Test
- RadioFrame System iDEN Functionality Test
- Interconnect & Dispatch Setup & Voice Quality
- Packet Data Service Connection and Latency
- Short Message Service
- Handover and Cell Reselection
- Interconnect Connection Stability and SQE Performance
- Dispatch Connection Stability
- Idle SQE Testing and Validation
- System Self-Recovery Test
- Packet Data Stability and Throughput
- Validation of ‘Unable to Key BR’ Alarm
- Rectifier & AC Power Alarms
- iSC-3 Functionality Test
- RadioFrame System iDEN Functionality Test
- Connecting the RFS to the Customer LAN
- Operations and Maintenance
- Appendixes
Method of Procedure
Equipment Commissioning
98 RFN_3.1 Beta
made via the handset. These tests are to be performed on a selected sample set
of links.
Table 1 Interconnect Call Quality, Setup and Stability
Test
#
MOP/PSTN Carrier # RSSI
(dbm)
SQE
(dbm)
Quality
(1-5)
Distance
(ft)
Sector Duration
(Min)
1 50 2
2 50 2
3 50 2
4 50 2
5 50 2
PSTN/MT
1 50 2
2 50 2
3 50 2
4 50 2
5 50 2
MO/MT
1 50 2
2 50 2
3 50 2
4 50 2
5 50 2
Table 2 Group Dispatch Call Quality, Setup, and Stability
Test
#
MO/MT Carrier # RSSI
(dbm)
SQE
(dbm)
Quality
(1-5)
Distance
(ft)
Sector Duration
(Min)
1 50 2
2 50 2
3 50 2
4 50 2
5 50 2
6 50 2
7 50 2
8 50 2
9 50 2
10 50 2