User's Manual

GSM/802.11b RadioFrame System Method of Procedure
Connecting to the Customer LAN
RadioFrame Networks, Inc.
83
6.5 Verifying the Wireless LAN (802.11b) Installation
Verifying the LAN installation requires a laptop that has 802.11b/g internally or a client
card that plugs into the PCMCIA port.
1 Associate with a iRAP in the RFS by matching the SSID on the client (laptop) and the
SSID that is configured in the System Manager.
2 Setup a static address on the client to communicate with the RFS (refer to Appendix
D for a list of default IP addresses for the RFS).
3 Once associated, open a command window and ping the BLIC IP addresses to
confirm that the client is properly associated with the iRAP (this also confirms
connectivity up to the BLIC).
4 Once associated, navigate to a few Internet addresses. This requires that the
Administrator correctly configure their network for this navigation.