User's Manual

GSM/802.11b RadioFrame System Method of Procedure

Connecting to the Customer LAN

RadioFrame Networks, Inc.

5 When WEP Encryption is disabled or “Off”, all other items related to WEP encryption

are disabled (WEP Keys and Shared Key Authentication). When “On”, a WEP Key

other than the globally configured WEP key can be selected. Also, Shared Key

Authentication can be enabled or disabled, “checked” or “unchecked” respectively.

For more information about Shared Key Authentication, refer to section 6.2.3.2

Shared Key Authentication.

RFN recommends that iRAP WEP Encryption settings be set globally rather than

individually.

iRAP WEP Encryption changes remain until changes are made to the global 802.11

settings.

6 Statistics lists information about the functioning of the iRAP, including:

Statistic Description

Transmitted Frames Number of frames transmitted by the iRAP

Received Frames Number of frames received by the iRAP

FCS Errors Number of FCS errors

WEP Undecryptable Frames Number of frames that could not be unencrypted

Transmit Failed Number of failed transmissions

Multiple Retries Number of retries attempted

IP Address IP address of the iRAP

MAC Address MAC address of the iRAP

7 For Enhanced Security, select either “On” or “Off”, and then select Save Changes.

6.4 Viewing WLAN User/iRAP Associations

To view clients and their associated iRAP(s), select the Active MAC addresses link on the

802.11 Global Configuration page. For each iRAP, the Active MAC Addresses page lists

each user associated with the iRAP, including the user name (Description) and the IP

address of the workstation or piece of equipment. Information is sorted by the iRAP IP

address.