User's Manual

RadioFrame System Method of Procedure GSM/802.11b

Final Checkout

66 RadioFrame Networks, Inc.

5.3 Configure the RFS GSM Services

To set up the RFS for GSM services to match the in-building site planning requirements,

complete the following procedure.

Select GSM Provisioning link under Other Configuration Options on the BCU

Configuration page.

For BTS ID, enter a value that uniquely identifies the BTS.

For DLC port number represents the port number on the DLC that the customer’s

BSC is connected to.

For Number of TRX, enter the total number of TRXs that will be used in the RFS.

For Type of Connection, select T1 or E1.

For Band Information, select the appropriate band—NA for North America or EU for

Europe.

For ABIS Interface, select the ABIS that matches the customer’s BSC ABIS type.

For Ericsson Settings, enter the Ericsson BCF Tei.

Select the Save Config button to save your changes.