User's Manual

GSM/802.11b RadioFrame System Method of Procedure

Final Checkout

RadioFrame Networks, Inc.

5.2.3 Configuring the RFUs

Configure an RFU as you would the BCU or ACU, by entering a device name and site

address information. For each RFU, the configuration page shows the GSM RadioBlades

and iRAPs inserted into the RFU by slot.

Select the icon of the RFU you want to configure.

For Device Name, enter up to 60 alphanumeric characters to uniquely identify the

RFU.

Use names that are meaningful to the installation.

For Building Address, enter up to 3,000 alphanumeric characters specifying the

location of the BCU.

You can describe the street address, mailing address, building, and other site

information, as well as the building floor to indicate the location of the unit.

Select Save Changes.