User's Manual

GSM/802.11b RadioFrame System Method of Procedure
Introduction
RadioFrame Networks, Inc.
1
1 Introduction
1.1 Scope of the Manual
This manual describes standards for installing, modifying and maintaining RadioFrame
Networks’ equipment at RadioFrame Networks customer sites. All specifications and
requirements pertain to the RadioFrame Networks equipment required in Global System
for Mobile communications (GSM)/802.11b/g installations. RadioFrame Networks
recommends reading the entire manual before attempting to install or operate
RadioFrame Networks equipment.
1.1.1 Prerequisites and Responsibilities
All installers are required to be trained and certified to install RadioFrame Networks
equipment as follows:
• Installers shall be trained for specific equipment or the warranty on that equipment
may be invalidated.
• All installers shall be able to use required tools and test equipment properly.
• Installers shall clean up and properly store tools at the end of each day’s work.
The installation Project Manager shall be responsible for, but not limited to:
• Ensuring that all detailed engineering specifications, job drawings, technical
information, and documentation required to successfully complete an installation are
on site.
• Identifying any physical damage, defects, or problems that may prevent the proper
installation, maintenance, or operation of equipment and reporting this information to
the proper parties involved.
• Making an inventory and conducting a visual inspection of all equipment shipped to
the job site prior to the installation.
• Ensuring that all installation job activities are completed in a safe and professional
manner whether or not the specific activity is mentioned in this manual.
• Ensuring that all locations where painted surfaces have been marred are touched up.
The touch-up paint shall be the same quality and shade as the paint used on the item
being touched up.
• Using this RadioFrame System GSM/802.11b/g Method of Procedure manual to
ensure that each specific job has been performed.
• Ensuring that the site is cleaned up after installation.
Preparation of a site and installation of equipment requires close coordination between
RadioFrame and its customers, and designated third-party RadioFrame Certified
Integration Partner(s). Domains of responsibilities are shown in the following table.