User's Manual

GSM/802.11b RadioFrame System Method of Procedure
Final Checkout
RadioFrame Networks, Inc.
59
NOTE: To change the password, select the User Provisioning link on the Home
page, and then select the User Name from the drop down menu. Type the current
password for the selected user name, and then type the new password and confirm
it. Select Save Changes.
5.1.1 Navigating the System Configuration
The System Configuration displays icons representing each component included in the
RFS starting with the BCU (see the following illustration). In the following example, ACU
192.168.200.10 is connected to the BCU rear port 1. Generally, the ACU connected to
BCU rear port 1 is the ACU located in the main rack, and the remaining are remote
ACUs. Configuration information for the BCU is displayed on the left side of the page,
including the device name and IP address.
1 To view configuration information for an ACU, select its icon.
A page similar to the BCU page appears displaying configuration information for the
selected ACU and icons for each RFU connected to the ACU. In the same way you
can view the status of each GSM RadioBlade installed in every RFU in the RFS by
selecting an RFU icon.
2 To return to a previous page, select the component pathname shown at the top of the
tab (System Configuration>BCU>ACU…).
3 To return to the BCU, select the System Configuration tab at any time.